Viper SRT/10 (2003-2010) Deluxe Front End Laser Mesh Grilles 4pc.

Description

Wow! It’s a Jaw Dropper! Race Car Look Series

“A jaw dropper”! Gorgeous 4-piece front grilles make your front end sparkle and give it a professional race car look. Wow, what a difference!

Made of solid stainless steel and laser cut to perfection. Will not rust, corrode, or lose its luster.

Easy peel-and-stick installation—no screws, drilling, or cutting required. Parts can be removed, and the car will return to stock if you choose.

INSTALLATION INSTRUCTIONS

Included: 4 Stainless Grilles; 2 Adhesive Promoter Packets

Your new accessories come with a protective surface liner. Leave this liner in place until installation is complete to prevent fingerprints or scratches.

The first step is to prepare all surfaces for the peel-and-stick application:

1. Thoroughly clean the upper areas just behind the painted opening directly on the bumper rail. After cleaning, swipe all areas with the provided adhesive promoter.
2. Before permanently attaching anything, place each grille insert in position to get acquainted with how they will sit.
3. Once familiar, set each grille section into place. Each section contains a half-round cutout indicating the tab positions on the bumper rail.
4. Tech Tip: It will be easier to set each grille section from behind the openings. Fold the clear release liner over so that you can pull the liner out from the back of each grille once in position.
   The lower right-hand driver-side grille, which contains the hood release handle, should be set while pulling the handle forward. This allows easy manipulation of the grille.
   Pull all release strips from the tabs of the grille sections, then press all tabs firmly to set them in place.
5. Once all four grille sections are initially set, each grille will have a couple of folding tabs to stabilize it.
   Peel the red release liner from the back of each tab, fold them down until they make contact, and press firmly to set.
   Tech Tip: It is helpful to remove the red release liner from the smaller tabs before installing the main sections.