Rear License Plate Panel Highly Polished©

Description

For Vipers 2001 & 2002.

This high-polished, shiny stainless steel plate fits inside your back license plate well. It frames your state’s plate while covering your keyhole and mounting nuts. The keyhole cover easily opens for access. Includes 2 chrome screw cap covers. It will not rust, corrode, or ever lose its luster.

Note: May fit other years depending on where your keyhole falls.

When installed properly, it will stay put and will not come off due to heat, cold, or vibration.

For the years 2001-2002, the red arrow distance should be 1 3/8 inches from the top of the license plate well to the top of the keyhole.

INSTALLATION INSTRUCTIONS

Items Included:

1 x Stainless Steel Tag Frame, 1 x Keyhole Cover Cap with key attached, 2 x Screw Sockets, 2 x Chrome Screw Covers, 2 x Stainless Screws

1. Remove your current license plate. Note: Your stock plate screws will not be reused.
2. You will notice two Velcro strips on the backside of your new tag frame. Peel the liner off these before positioning. This Velcro will eliminate any vibrations.
3. Position the frame over the two attachment holes and screw it down using the two stainless screws and screw sockets provided. Be careful not to overtighten. Snap chrome screw covers over the screw sockets. Push in the keyhole cover.

Note: Care must be taken when cleaning your cover. Lightly dust your cover with a clean soft cloth first to prevent any particles from scratching it. Then wipe using a good quality streak-free glass cleaner with a new, clean soft cloth.