Dodge Viper SRT-10 (2003-2010) Door Beauty Panels – Brushed Set of 2

Description

Stainless Steel Door Panels for Viper SRT10

These stainless steel door panels are designed for your Viper SRT10. Each set includes one beautifully brushed panel per door. They are easy to mount — simply peel and stick. These panels add a clean, finished look to your interior. Made entirely of stainless steel, they will not rust, corrode, stain, or lose their shine. When installed properly, they will stay firmly in place and will not come off due to heat, cold, or vibration.

Installation Instructions

Parts Included: 2 Brushed Door Guards, 2 Tape Test Strips, 1 Abrasive Pad, and 2 Adhesive Promoter Packets.

Your door guards come with a protective liner. Do not remove it until the part is fully installed.

Very Important: Please read all instructions carefully before beginning installation. You must follow these directions exactly, or your new panels may not adhere properly.

1. Before you begin, you must first prepare the door panel to allow proper adhesion. Scrub the entire area thoroughly with household Isopropyl Alcohol, available at most grocery and hardware stores. Then follow the remaining steps carefully.
2. If your door panels have ever been treated with Armor All or silicone coatings, installation will not work unless those treatments are completely removed with special cleaners. Household isopropyl alcohol alone may not remove them.
   Note: Some doors may have been treated at the dealership or factory before purchase. To be safe, refer to the special preparation instructions enclosed. We cannot be responsible for panels that fail to adhere due to improper door preparation.
3. Note: You have been provided with a small abrasive pad and a tape test strip to check adhesion before mounting. After cleaning, apply the test tape to several spots. If it sticks well, proceed to the next step. If not, re-clean the area until it does.

Do not attempt to install your door guards until your test strips adhere properly.

1. Apply a strip of masking tape along the upper edge of the door panel to protect it. Lightly scuff the panel’s mounting area along the entire perimeter and wipe away all residue. This will create a slightly rough surface. Then, swipe the entire area with the adhesive promoter provided and allow a few seconds to dry.
2. Before removing the red liner for permanent attachment, place the door guard in position and check the fit. The panel comes preformed, but it may require slight hand-forming to ensure a perfect contour. It should lie flat and naturally conform to the door’s shape without force. Make sure all points tuck properly into the door panel and do not protrude.
3. Remove the red liner carefully (avoid touching the adhesive) and press the door guard firmly across the entire surface to secure it.
4. Remove the protective liner. Repeat all steps for the other door.

If you have any questions during installation, please contact admin@TheViperStore.com.

Maintenance: Handle your door guards with care. Lightly dust them with a clean, soft cloth to prevent scratches. Then, wipe with a fresh soft cloth and a high-quality streak-free glass cleaner for the best shine.