Description
Best SCT Viper Engine Upgrade Tune in the World!
This tune is done by the world’s BEST Viper tuners! Finally, Viper SRT-10 owners have a means of flash-programming their Powertrain Control Modules to make changes in the way the engine systems operate or to correctly control aftermarket engine modifications without the need for piggyback or inline controllers or replacing the controller. The capability of the factory PCM is greater than expected and can now be programmed by the end user easily without removing a single screw.
The flash programmers (XCal3) can hold a total of 3 tunes plus the stock tune. The end user can switch between these tunes anytime by plugging the controller into the OBD-2 port under the driver’s side dash. An SCT/DCX authorized dealer, such as ours, can edit these tunes if the car is upgraded again. With the LiveLoad software, these tunes can be emailed and uploaded by the customer at home. The flash programmer will VIN lock to your car once used, although it can be unlocked and moved to a different car for a fee. The XCal2 can also read and erase DTCs to extinguish the check engine light and diagnose faults.
The purchase price includes 1 XCal3 and up to 3 basic tunes. Additional basic tunes can be added later at an extra cost. Our lab works with the customer to determine what parameters will be changed, such as injector scaling, fan temps, spark and fuel maps, decel fuel modes, etc. You choose your parameters, or we can choose them for you. There are no hidden fees for custom tunesLarge-scalele custom tuning for extremely modified engines is charged by the hour.
Select your Processor Code, the part number found on your PCM. If your code is not listed, contact us to have it added. The PCMs on 2003-2006 Vipers are located on the driver side inner fender, behind the upper radiator hose, and to the rear of the headlight. Also, select the number of tunes you wish to start with; additional tunes can be added later.
This price includes one advanced upgrade tune. This device allows up to three custom tunes. Each additional tune is an extra cost. We will need to know all modifications to your Viper and the fuel you will be using.
Adding up to 30 rear wheel horsepower and 30 rear wheel torque has never been this easy or inexpensive! This SCT flash device allows quick and easy power upgrades by simply plugging it into your diagnostic computer port and downloading one of the low, medium, or high-performance custom tunes. The SCT XCalibrator 3 arrives with 1 performance tune, custom-written and tested, including the skip shift feature turned off and programming to turn the fan on at 181 degrees versus the stock 210 degrees. This tool also allows the user to diagnose check engine lights and clear trouble codes. Your factory tune will never be lost, as the XCalibrator 2 can store it if you choose to return to factory settings. All these features make this device a “must-have” for all GEN3 Viper owners.
Example: The following performance gains were recorded on our in-house dyno using 93 octane fuel: Rear Wheel HP / Rear Wheel Torque gains @ RPM are: 5 HP / 13 TQ @ 2,000 RPM, 6 HP / 13 TQ @ 2,500 RPM, 7 HP / 14 TQ @ 3,000 RPM, 20 HP / 30 TQ @ 3,500 RPM, 25 HP / 31 TQ @ 4,000 RPM, 30 HP / 35 TQ @ 4,500 RPM, 25 HP / 26 TQ @ 5,000 RPM, 12 HP / 11 TQ @ 5,500 RPM. These tunes were carefully created and tested to allow maximum performance without engine pinging.
NOTE: Please include your phone number so we may call you to get all the information we need.
** If your vehicle has modifications such as a supercharger, turbocharger, nitrous, or upgraded cam, this tune is not available.
Reviews
There are no reviews yet.