Professional installation only.  Graphic kit is PRECUT and ready to install in a wide variety of colors - slight final trimming needed as required by professional installers.

This stripe package is not just a box of straight strips. Our graphic kit consists of tapered, pre-fitted and contoured pieces as shown in the illustration - straight stripes will not work on this vehicle. Thus, due to the fact that this kit is created specifically for the '13-Current Dodge SRT Viper it will not fit any other vehicle.

Stripes measure from 10.5" and tapers down to 5.5" and require center spacing of 4" between stripes at time of installation as per our detailed Parts List.  Goes down the back side of the car as well (not shown).  Goes down the back side of the car as well (not shown).

Graphic package includes general online application and care instructions.

Fits the both SRT & GTS models!

NOTE:  If you have an extra spoiler, even the carbon fiber factory small spoiler you will need to purchase the additional spoiler kit below.

**High quality simulated carbon fiber vinyl or Real air release carbon fiber available upon request.  Ask for pricing.

    
 
    

Trimmable Spoiler Kit #ATD-DDGEVPRGRPH16 consists of two (2) pieces 16" (40.64cm) in length that can be trimmed during installation for custom spoiler applications.
Rally stripe graphics provided by the factory are generally painted on the vehicle. As such, stripes tend to bend into and out of inner areas such as Hood and Rear Lid openings.
Pieces provided with this kit DO NOT lap into such areas but rather stop, with slight margin, at the end of each panel of application. Margin of vehicle paint exposure from panel edge ranges from 0.0625” (1.58mm) to 0.125” (3.175mm). Moreover, due to vinyl graphic material limitations, relief cuts in areas such as the center Hood vent are provided for ease of application.

Professional installation only.  Graphic kit is PRECUT and ready to install in a wide variety of colors - slight final trimming needed as required by professional installers.

This stripe package is not just a box of straight strips. Our graphic kit consists of tapered, pre-fitted and contoured pieces as shown in the illustration - straight stripes will not work on this vehicle. Thus, due to the fact that this kit is created specifically for the '13-Current Dodge Viper it will not fit any other vehicle.

Stripes require spacing from the center of the vehicle at time of installation as per our detailed Parts List.

Graphic package includes general online application and care instructions.

$  179.95 (Opaque Colors)
 

Choose Color:

White Gloss Black Matte Black Bay Gray Vivid Blue Sapphire Blue Buckskin Bright Yellow Golden Yellow Orange Tangerine Tomato Red Electric Red Red Dark Red Burgunady Ocean Spray Pink Purple Lime-Tree Green

Choose model:

6 vent hood 2 vent hood

  

...OR...

$ Call for Price  (Special Colors)

OPTIONAL...

$  39.95  Add - Trimmable Spoiler Kit to match

Special Order with a
NO return policy.

2 week delivery

This stripe package is not just a box of straight strips. Our graphic kit consists of tapered, pre-fitted and contoured pieces as shown in the illustration - straight stripes will not work on this vehicle. Thus, due to the fact that this kit is created specifically for the '13-Current Dodge SRT Viper it will not fit any other vehicle.

Stripes require center spacing of 1.75" (44.45mm) at time of installation as per our detailed Parts List.

Graphic package includes general online application and care instructions.

Professional installation only.  Graphic kit is PRECUT and ready to install in a wide variety of colors - slight final trimming needed as required by professional installers.

Available in various colors (shown in Black), graphic is designed to be placed along the bottom Hood edge and up to the rear of the Hood as shown in image.