Dodge Viper SRT/10 (2003-2010) Windshield Weather Deflector (Set of 2) ACC-972034 INSTALLATION INSTRUCTIONS
Included: 2 x Windshield Deflectors, 1 Promoter packet, 1 Tape Test stick kit
READ BEFORE MOUNTING---
2. Once you have completed the surface preparation use your Test Stick Kit (included). Peel back the red liner off the small piece of tape and try sticking a corner of it on to the surface you will be mounting your Windshield Deflectors. Try it in several locations. Stick and pull off. If it sticks tightly your surface is ready for you to mount your Windshield Deflectors.
3. Take out the Promoter and rip the packet open. Remove the moistened towlette and wipe down the areas where you will be mounting your pieces.
4. Take out your Windshield Deflectors - without removing the back liner - set it up against the area it is to be mounted. If necessary - gently bend the the Windshield Deflectors to match the contour of the body. Become familiar with the way it will fit once mounted. Now do the same for the other side.
5. (Note:
once you remove the red liner you may not return the the product)
Take the first Windshield Deflector and remove the rear red liner.
Be careful not to touch the rear sticky tape against anything including
your fingers. Hold the Windshield Deflector about a half
inch above the area where you plan on mounting it. Line it up.
|